Upload a STEP file.
Extract design intent, technical requirements, and DFM cost drivers — in seconds.

Setups·Holes + L/D·Thin walls·Tooling·DFM flags·Material removal
STEP file
.step or .stp — required
Engineering drawing
PDF — optional
Files stored under a unique ID. Never shared without your permission.
What you get

Everything to evaluate a part before you quote

SETUPS
3-axis vs 5-axis
Number of fixturings, approach axis per setup, and machine classification.
HOLES
Full hole inventory
Through, blind, counterbore, countersink — with diameter, depth, and L/D ratios flagged.
THIN WALLS
Thickness + severity
Geometry-based and hole proximity detection. Critical, warning, advisory ratings.
VOLUME
Material removal %
Bounding box vs solid volume — see how much stock you're cutting before you quote.
TOOLING
Min tool dia + changes
Per-fixturing cutter constraints and estimated tool swaps from hole sizes and fillets.
DFM FLAGS
Issues — ranked
Deep pockets, small radii, tight access, special tooling — flagged with severity and detail.
How it works

Three steps

01
Upload your STEP file
Drop in the file. Optionally add an engineering drawing for tolerance context.
02
We analyze the geometry
Features, setups, tooling, and manufacturability issues — extracted automatically.
03
You get the breakdown
Everything you need to decide if a job is worth taking and what to charge.

Your files. Your control.

Stored under a unique identifier — no public exposure
Never shared without your explicit permission
No account required — upload, get your analysis, done